Total Knee Arthroplasty Market Synopsis:
Total Knee Arthroplasty Market Size Was Valued at USD 9.89 Billion in 2023, and is Projected to Reach USD 15.47 Billion by 2032, Growing at a CAGR of 5.10% From 2024-2032.
Total knee Joint replacement surgery, which is called Total Knee Arthroplasty (TKA), is a surgical procedure that involves the substitute of the destroyed or ill knee joint with the artificial implant materials most commonly used are metal and plastic. The essence of this process is to help patients with such diseases as osteoarthritis, rheumatoid arthritis or post-traumatic arthritis to overcome the pain and to increase their quality of life, improve their mobility. TKA can be offered as the definitive surgery or, more often, as the revision surgery to exchange or to revise a failed previous knee implant.
There are few key trends in the market of Total Knee Arthroplasty and the first one is the rising occurrence of disorders associated with knees, especially amongst the elderly. Osteoarthritis for instance which is a degenerative condition is becoming more and more prevalent due to an aging global population who therefore require knee replacements. Moreover, enhancement of obesity levels and dynamic youthful course of escalated movements also leading to joint deterioration are adding to the TKA requirement.
There exists more pressure for market growth due to increased surgical refinement and implant technologies. Advanced techniques of performing surgical operations, latest techniques like robot assisted surgery and using better and more effective biomaterial in order to make implants longer lasting have helped in minimizing the consequences of the operations, shortening the time the patient takes to recover as well as increasing the patient satisfaction level. In addition to increasing the effectiveness of TKAs, these developments make TKA a valid treatment choice for more individuals.
Total Knee Arthroplasty Market Trend Analysis:
The growing shift towards outpatient and same-day discharge procedures.
- Total Knee Arthroplasty shows a remarkable change in tendencies where most of the surgeries are being performed on an outpatient basis, and patients being discharged on the same day. Thanks to advancement in anaesthesiology and methods of controlling pain, most knee replacement operations can be performed in an outpatient basis without extensive hospitalization. Not only does this phenomenon decrease healthcare cost, but it also makes the patient’s postoperative experience less painful, giving a boost to the number of TKA procedures done at ambulatory surgical centres.
- Another trend which is has emerged is that of customized medicine and patient-specific implants. The current mechanics of 3D printing is making it possible to design different knee implant solutions that closely fit the patient specific anatomy of different patients. This personalization enhances the crowding and prosthetic contour, conceivably making for a better operative result and also the possessive longevity of the prosthesis.
Healthcare infrastructure improves and disposable incomes rise in countries.
- It is understood that the Total Knee Arthroplasty market hold out a number of opportunities to flourish prominent in growing areas. As the expansion of the health care facilities increases coupled with the growing disposable incomes in the emerging economies like India, Brazil and China, the emerging demands of the orthopedic surgeries, including TKA. The increase in availability of healthcare services along with the growth in awareness of better surgical technologies is more likely to increase the growth of this market in these regions.
- In addition, the investment in advanced evolving technologies like AI and machine learning has gradually introduced an opportunity for manufacturers as they can contribute to preoperative planning and postoperative care. Through efficiency of the operations, the measurements of surgeries and patients, firms can enhance the wellbeing of their clients, and the flow of their operations to be at par with the current changes in the TKA market.
Total Knee Arthroplasty Market Segment Analysis:
Total Knee Arthroplasty Market is Segmented on the basis of Product Type, Material, Fixation Type, End User and Region.
By Product Type, Primary Knee Arthroplasty segment is expected to dominate the market during the forecast period
- Total knee arthroplasty consists of the first time one undergoes knee surgery where an affected joint is replaced with an artificial surface usually as a result of diseases such as osteoarthritis or rheumatoid arthritis. This surgical process is required where individuals have developed knees complications which may result in pain and dysfunction. Revision knee arthroplasty on the other hand is done in order to replace or fix a knee prosthesis that may have had problems such as wear out, infection or any other complication. This form of surgery is more intricate and needs specialized instruments and replacement parts thus highlighting the emerging necessity for better approaches in handling mid to long term repercussions of knee replacements.
By Material, Metal segment expected to held the largest share
- Metal, plastic, and ceramic. Knee implants are perhaps the most common types of joint implants, and metal components, most notably the cobalt-chromium alloys or titanium, have been favored because of their enhanced strength as well as their capacity for loads bearing exercises. Polyethylene, frequently of high density, is the bearing material in knee prostheses, the function of which is to offer low friction, thus facilitating gliding movements. Ceramics have found their way into biomedical applications due to their biocompatibility and wear resistance and are ideal for use on load bearing surfaces of knee prosthesis. Every one of these materials have unique capabilities for use in knee arthroplasty devices and increases the durability of the artificial limbs.
Total Knee Arthroplasty Market Regional Insights:
North America is Expected to Dominate the Market Over the Forecast period
- North America, who forms the largest submarket, continues to account for the highest proportion of the total revenues of Total Knee Arthroplasty. The reason for this is the relatively high incidence of knee pathology, as well as the availability of advanced surgical technologies as a result of a well-developed healthcare system. Also, stable legal environment also plays a vital role for medical devices safety and effectiveness and contribution to further development and market in the region.
- However, the use of robots especially in conducting surgical operations and exploring minimally invasive technologies in North America increases the total quality of patients. The area is occupied by several market stakeholders and research organizations focused on the development of orthopedic solutions, stabilizing its leading position in the Total Knee Arthroplasty market.
Active Key Players in the Total Knee Arthroplasty Market
- B. Braun Melsungen AG (Germany)
- Conformis, Inc. (United States)
- DePuy Synthes (Johnson & Johnson) (United States)
- Exactech, Inc. (United States)
- Hanger, Inc. (United States)
- Medtronic plc (Ireland)
- Ottobock SE & Co. KGaA (Germany)
- Smith & Nephew plc (United Kingdom)
- Stryker Corporation (United States)
- Zimmer Biomet Holdings, Inc. (United States)
- Other Active Players.
|
Total Knee Arthroplasty Market |
|||
|
Base Year: |
2023 |
Forecast Period: |
2024-2032 |
|
Historical Data: |
2017 to 2023 |
Market Size in 2023: |
USD 9.89 Billion |
|
Forecast Period 2024-32 CAGR: |
5.10% |
Market Size in 2032: |
USD 15.47 Billion |
|
Segments Covered: |
By Product Type |
|
|
|
By Material |
|
||
|
Fixation Type |
|
||
|
By End User |
|
||
|
By Region |
|
||
|
Key Market Drivers: |
|
||
|
Key Market Restraints: |
|
||
|
Key Opportunities: |
|
||
|
Companies Covered in the report: |
|
||
Chapter 1: Introduction
1.1 Scope and Coverage
Chapter 2:Executive Summary
Chapter 3: Market Landscape
3.1 Industry Dynamics and Opportunity Analysis
3.1.1 Growth Drivers
3.1.2 Limiting Factors
3.1.3 Growth Opportunities
3.1.4 Challenges and Risks
3.2 Market Trend Analysis
3.3 Strategic Pestle Overview
3.4 Porter's Five Forces Analysis
3.5 Industry Value Chain Mapping
3.6 Regulatory Framework
3.7 Princing Trend Analysis
3.8 Patent Analysis
3.9 Technology Evolution
3.10 Investment Pockets
3.11 Import-Export Analysis
Chapter 4: Total Knee Arthroplasty Market by Product Type
4.1 Total Knee Arthroplasty Market Snapshot and Growth Engine
4.2 Total Knee Arthroplasty Market Overview
4.3 Primary Knee Arthroplasty
4.3.1 Introduction and Market Overview
4.3.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
4.3.3 Primary Knee Arthroplasty: Geographic Segmentation Analysis
4.4 Revision Knee Arthroplasty
4.4.1 Introduction and Market Overview
4.4.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
4.4.3 Revision Knee Arthroplasty: Geographic Segmentation Analysis
Chapter 5: Total Knee Arthroplasty Market by Material
5.1 Total Knee Arthroplasty Market Snapshot and Growth Engine
5.2 Total Knee Arthroplasty Market Overview
5.3 Metal
5.3.1 Introduction and Market Overview
5.3.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
5.3.3 Metal: Geographic Segmentation Analysis
5.4 Plastic
5.4.1 Introduction and Market Overview
5.4.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
5.4.3 Plastic: Geographic Segmentation Analysis
5.5 Ceramic
5.5.1 Introduction and Market Overview
5.5.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
5.5.3 Ceramic: Geographic Segmentation Analysis
Chapter 6: Total Knee Arthroplasty Market by Fixation Type
6.1 Total Knee Arthroplasty Market Snapshot and Growth Engine
6.2 Total Knee Arthroplasty Market Overview
6.3 Cemented
6.3.1 Introduction and Market Overview
6.3.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
6.3.3 Cemented: Geographic Segmentation Analysis
6.4 Cementless
6.4.1 Introduction and Market Overview
6.4.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
6.4.3 Cementless: Geographic Segmentation Analysis
6.5 Hybrid
6.5.1 Introduction and Market Overview
6.5.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
6.5.3 Hybrid: Geographic Segmentation Analysis
Chapter 7: Total Knee Arthroplasty Market by End User
7.1 Total Knee Arthroplasty Market Snapshot and Growth Engine
7.2 Total Knee Arthroplasty Market Overview
7.3 Hospitals
7.3.1 Introduction and Market Overview
7.3.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
7.3.3 Hospitals: Geographic Segmentation Analysis
7.4 Ambulatory Surgical Centers
7.4.1 Introduction and Market Overview
7.4.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
7.4.3 Ambulatory Surgical Centers: Geographic Segmentation Analysis
7.5 Orthopedic Clinics)
7.5.1 Introduction and Market Overview
7.5.2 Historic and Forecasted Market Size in Value USD and Volume Units (2017-2032F)
7.5.3 Orthopedic Clinics) : Geographic Segmentation Analysis
Chapter 8: Company Profiles and Competitive Analysis
8.1 Competitive Landscape
8.1.1 Competitive Benchmarking
8.1.2 Total Knee Arthroplasty Market Share by Manufacturer (2023)
8.1.3 Concentration Ratio(CR5)
8.1.4 Heat Map Analysis
8.1.5 Mergers and Acquisitions
8.2 STRYKER CORPORATION (UNITED STATES)
8.2.1 Company Overview
8.2.2 Key Executives
8.2.3 Company Snapshot
8.2.4 Operating Business Segments
8.2.5 Product Portfolio
8.2.6 Business Performance
8.2.7 Key Strategic Moves and Recent Developments
8.3 ZIMMER BIOMET HOLDINGS INC. (UNITED STATES)
8.4 DEPUY SYNTHES (JOHNSON & JOHNSON) (UNITED STATES)
8.5 SMITH & NEPHEW PLC (UNITED KINGDOM)
8.6 B. BRAUN MELSUNGEN AG (GERMANY)
8.7 MEDTRONIC PLC (IRELAND)
8.8 OTTOBOCK SE & CO. KGAA (GERMANY)
8.9 EXACTECH INC. (UNITED STATES)
8.10 CONFORMIS INC. (UNITED STATES)
8.11 HANGER INC. (UNITED STATES)
8.12 OTHER ACTIVE PLAYERS
Chapter 9: Global Total Knee Arthroplasty Market By Region
9.1 Overview
9.2. North America Total Knee Arthroplasty Market
9.2.1 Historic and Forecasted Market Size by Segments
9.2.2 Historic and Forecasted Market Size By Product Type
9.2.2.1 Primary Knee Arthroplasty
9.2.2.2 Revision Knee Arthroplasty
9.2.3 Historic and Forecasted Market Size By Material
9.2.3.1 Metal
9.2.3.2 Plastic
9.2.3.3 Ceramic
9.2.4 Historic and Forecasted Market Size By Fixation Type
9.2.4.1 Cemented
9.2.4.2 Cementless
9.2.4.3 Hybrid
9.2.5 Historic and Forecasted Market Size By End User
9.2.5.1 Hospitals
9.2.5.2 Ambulatory Surgical Centers
9.2.5.3 Orthopedic Clinics)
9.2.6 Historic and Forecast Market Size by Country
9.2.6.1 US
9.2.6.2 Canada
9.2.6.3 Mexico
9.3. Eastern Europe Total Knee Arthroplasty Market
9.3.1 Historic and Forecasted Market Size by Segments
9.3.2 Historic and Forecasted Market Size By Product Type
9.3.2.1 Primary Knee Arthroplasty
9.3.2.2 Revision Knee Arthroplasty
9.3.3 Historic and Forecasted Market Size By Material
9.3.3.1 Metal
9.3.3.2 Plastic
9.3.3.3 Ceramic
9.3.4 Historic and Forecasted Market Size By Fixation Type
9.3.4.1 Cemented
9.3.4.2 Cementless
9.3.4.3 Hybrid
9.3.5 Historic and Forecasted Market Size By End User
9.3.5.1 Hospitals
9.3.5.2 Ambulatory Surgical Centers
9.3.5.3 Orthopedic Clinics)
9.3.6 Historic and Forecast Market Size by Country
9.3.6.1 Bulgaria
9.3.6.2 The Czech Republic
9.3.6.3 Hungary
9.3.6.4 Poland
9.3.6.5 Romania
9.3.6.6 Rest of Eastern Europe
9.4. Western Europe Total Knee Arthroplasty Market
9.4.1 Historic and Forecasted Market Size by Segments
9.4.2 Historic and Forecasted Market Size By Product Type
9.4.2.1 Primary Knee Arthroplasty
9.4.2.2 Revision Knee Arthroplasty
9.4.3 Historic and Forecasted Market Size By Material
9.4.3.1 Metal
9.4.3.2 Plastic
9.4.3.3 Ceramic
9.4.4 Historic and Forecasted Market Size By Fixation Type
9.4.4.1 Cemented
9.4.4.2 Cementless
9.4.4.3 Hybrid
9.4.5 Historic and Forecasted Market Size By End User
9.4.5.1 Hospitals
9.4.5.2 Ambulatory Surgical Centers
9.4.5.3 Orthopedic Clinics)
9.4.6 Historic and Forecast Market Size by Country
9.4.6.1 Germany
9.4.6.2 UK
9.4.6.3 France
9.4.6.4 Netherlands
9.4.6.5 Italy
9.4.6.6 Russia
9.4.6.7 Spain
9.4.6.8 Rest of Western Europe
9.5. Asia Pacific Total Knee Arthroplasty Market
9.5.1 Historic and Forecasted Market Size by Segments
9.5.2 Historic and Forecasted Market Size By Product Type
9.5.2.1 Primary Knee Arthroplasty
9.5.2.2 Revision Knee Arthroplasty
9.5.3 Historic and Forecasted Market Size By Material
9.5.3.1 Metal
9.5.3.2 Plastic
9.5.3.3 Ceramic
9.5.4 Historic and Forecasted Market Size By Fixation Type
9.5.4.1 Cemented
9.5.4.2 Cementless
9.5.4.3 Hybrid
9.5.5 Historic and Forecasted Market Size By End User
9.5.5.1 Hospitals
9.5.5.2 Ambulatory Surgical Centers
9.5.5.3 Orthopedic Clinics)
9.5.6 Historic and Forecast Market Size by Country
9.5.6.1 China
9.5.6.2 India
9.5.6.3 Japan
9.5.6.4 South Korea
9.5.6.5 Malaysia
9.5.6.6 Thailand
9.5.6.7 Vietnam
9.5.6.8 The Philippines
9.5.6.9 Australia
9.5.6.10 New Zealand
9.5.6.11 Rest of APAC
9.6. Middle East & Africa Total Knee Arthroplasty Market
9.6.1 Historic and Forecasted Market Size by Segments
9.6.2 Historic and Forecasted Market Size By Product Type
9.6.2.1 Primary Knee Arthroplasty
9.6.2.2 Revision Knee Arthroplasty
9.6.3 Historic and Forecasted Market Size By Material
9.6.3.1 Metal
9.6.3.2 Plastic
9.6.3.3 Ceramic
9.6.4 Historic and Forecasted Market Size By Fixation Type
9.6.4.1 Cemented
9.6.4.2 Cementless
9.6.4.3 Hybrid
9.6.5 Historic and Forecasted Market Size By End User
9.6.5.1 Hospitals
9.6.5.2 Ambulatory Surgical Centers
9.6.5.3 Orthopedic Clinics)
9.6.6 Historic and Forecast Market Size by Country
9.6.6.1 Turkey
9.6.6.2 Bahrain
9.6.6.3 Kuwait
9.6.6.4 Saudi Arabia
9.6.6.5 Qatar
9.6.6.6 UAE
9.6.6.7 Israel
9.6.6.8 South Africa
9.7. South America Total Knee Arthroplasty Market
9.7.1 Historic and Forecasted Market Size by Segments
9.7.2 Historic and Forecasted Market Size By Product Type
9.7.2.1 Primary Knee Arthroplasty
9.7.2.2 Revision Knee Arthroplasty
9.7.3 Historic and Forecasted Market Size By Material
9.7.3.1 Metal
9.7.3.2 Plastic
9.7.3.3 Ceramic
9.7.4 Historic and Forecasted Market Size By Fixation Type
9.7.4.1 Cemented
9.7.4.2 Cementless
9.7.4.3 Hybrid
9.7.5 Historic and Forecasted Market Size By End User
9.7.5.1 Hospitals
9.7.5.2 Ambulatory Surgical Centers
9.7.5.3 Orthopedic Clinics)
9.7.6 Historic and Forecast Market Size by Country
9.7.6.1 Brazil
9.7.6.2 Argentina
9.7.6.3 Rest of SA
Chapter 10 Analyst Viewpoint and Conclusion
10.1 Recommendations and Concluding Analysis
10.2 Potential Market Strategies
Chapter 11 Research Methodology
11.1 Research Process
11.2 Primary Research
11.3 Secondary Research
|
Total Knee Arthroplasty Market |
|||
|
Base Year: |
2023 |
Forecast Period: |
2024-2032 |
|
Historical Data: |
2017 to 2023 |
Market Size in 2023: |
USD 9.89 Billion |
|
Forecast Period 2024-32 CAGR: |
5.10% |
Market Size in 2032: |
USD 15.47 Billion |
|
Segments Covered: |
By Product Type |
|
|
|
By Material |
|
||
|
Fixation Type |
|
||
|
By End User |
|
||
|
By Region |
|
||
|
Key Market Drivers: |
|
||
|
Key Market Restraints: |
|
||
|
Key Opportunities: |
|
||
|
Companies Covered in the report: |
|
||
